Master 102D Instruction Manual

TRANSDUCER TE232-102D, TE485-102D Programmable temperature transducer for RTD Pt1000 sensor with serial output RS232 and RS485 Inst

Notes: 10 10

Notes: 11

Instruction Manual for use of transducer: TE232-102D (RS232), TE485-102D (RS485) Transducer is designed for temperature measurement at °C or °F by mea

The cable should be led in one line, i.e. NOT to „tree“ or „star“. Termination resistor should be located at the end. For short distance other topolog

Typical application wiring, connection of terminals TE232-102D – power from communication port TE232-102D – power from external voltage source TE485

Info mode If in doubt of setting of installed transducer, verification of its address is enabled even without using computer. Power should be connecte

Modbus registers of the device Variable Unit AddressXFormat Size Status Measured temperature [°C] 0x0031 Int*10 BIN16 R Address of transmitter [

ARION communication protocol - AMiT company The device supports communication protocol ARiON version 1.00. For more details see www.amit.cz. Error sta

Technical parameters of the instrument: RS 485 Interface: Receiver-Input Resistance: 96 kΩ Devices on bus: max. 256 (1/8 Unit Receiver Load) Meas

Appendix A Connection of ELO E06D converter (RS232/RS485) (optionally accessory of the transducer TE485-102D) The ELO E06D converter is an optional